Tension Sensor SFZ

Menu sản phẩm

Hổ trợ trực tuyến



huy@ansgroup.asia
dieu.ans@ansvietnam.com
Mr. Huy: 0934 039 951
Ms. Diệu: 0902.337.066

Lượt truy cập

	Đang online	4
	Lượt truy cập	108673

Loại sản phẩm: Hans-schmidt

Mã sản phẩm: Tension Sensor SFZ

Nhà cung cấp: ANS Vietnam

Xuất Xứ: Chính hãng

Hãng sản xuất: Hans-schmidt Vietnam

Giá : Vui lòng liên hệ

8 tension ranges from 0 - 10 N up to 0 - 2000 N

For measuring the tension of running wires, fibre optics, cables, ropes, slim tapes and foils

Single roller tension sensor for installation at an existing deflection pully

Tension sensor SFZ for measuring wires, cables, ropes, tapes usw.

Tension sensor SFZ Conformitï¿½ Europï¿½enne

Model Information

» Calculation of the Tension Range

» Display Units and Amplifier

Special Features

Precision DMS sensor with best accuracy
Direct, axial force application
High overload proctection (max. 10 times of nominal force)
Easy mounting by using mechanical stops and limited space requirements
The progressively adjustable axial mounting depth using a drill hole (Ø 30 mm), enables acurate positioning of the roller depanding on the material path
Easy mounting by rollers provided by the customer
Required power supply 10 V DC regulated
Output signal mV/V
Connection to an external amplifier is recommended
IP 67 (dust tight and ingress of water) protected, optional IP 54

Standard Features

Rugged, stainless steel housing
Sensor with highly mechanical rigidity
Securely attached, shielded 5 m cable with open ends (longer cables at request)
Clamps version optional available
Supplied with a 5 m shielded cable with open ends (Optional length are available)

Available Models

Model	Nominal Force
SFZ-10	10 N
SFZ-20	20 N
SFZ-50	50 N
SFZ-100	100 N
SFZ-200	200 N
SFZ-500	500 N
SFZ-1000	1000 N
SFZ-2000	2000 N

Mounting

The sensor can be easily mounted everywhere a deviating point respectively a guide roller is built in at the machine. These places can be use as measuring point, assumed the in and outgoing angle is constant.

For mounting, the sensor can be clamped on each position of the cylinder. Alternativ a mounting flange or a clamping block is available (see additional Options)

Please click picture to see
installation suggestions sketch

Calculation of the Tension Range

The tension range can be calculated for every wrapping angle with this formula:

When selecting the nominal measurement force it is necessary to take into account the weight of the guide roll and raise the nominal load respectively, particularly when working with small nominal forces.

Axle Journal

Design	Axle diameter mm	Suitable bearing
A (standard)	10 f7	6000 / 6300
B	15 f7	6002 / 6302
C	17 f7	6003 / 6303

According to the application different bearing journals are available (standard: code A = 10 mm)
More information to the design see dimensions

Guide Rollers

Example for rolls, usable for tensions sensor SFZ

You can mount your own guide rollers or Schmidt rollers. A big number of rollers with different geometry and different materials are available on request - send us your demand profile