Tension Meter DTMX

Menu sản phẩm

Hổ trợ trực tuyến



huy@ansgroup.asia
dieu.ans@ansvietnam.com
Mr. Huy: 0934 039 951
Ms. Diệu: 0902.337.066

Lượt truy cập

	Đang online	4
	Lượt truy cập	118516

Loại sản phẩm: Hans-schmidt

Mã sản phẩm: Tension Meter DTMX

Nhà cung cấp: ANS Vietnam

Xuất Xứ: Chính hãng

Hãng sản xuất: Hans-schmidt Vietnam

Giá : Vui lòng liên hệ

9 Tension ranges from 0.1 - 200 cN to 5 - 50 daN

Electronic tension meter for applications in textile and wire industry.
Special convenient for users aquiring additional process data to save them for example for a QM-system ISO9000ff

Model DTMX offers additional features to model DTMB:

data memory
statistical analysis
interface for data printer and PC connection

Applications in textile industry: e. g. 50 up to max. 50000 tex
Applications in wire industry: e. g. 0.08 up to 2.2 Ø mm copper wire

4 different calibrations for customer supplied material can be saved at this tension meter

electronic tension meter DTMX with interface and data memory

Tension meter DTMX Conformitï¿½ Europï¿½enne

Model Information

» Accessories (optional)

» Calibration Report (optional)

Special Features

Addtional features comparing model DTMX with basic unit model DTMB

Memory for up to 100 tension values plus MIN, MAX, PEAK values
- automatic calculation of average and standard deviation
- all these data values can be recalled in the display or downloaded
to a printer or Personal Computer.
2 Memory modes:
- continuous storage
- on-demand storage
Analog and serial interfaces
Material selector switch for textile and wire applications (Tex and Wire) assures highest accuracy
Calibration to customer supplied material is available (up to four different material calibrations)

Features model DTMB

Microprocessor controlled tension meter for highest accuracy
Measuring principle: double beam in bending with strain gauge
Selectable update rates (0.5, 1, 2, or 4 seconds) to provide steady readings when tensions fluctuate (electronic damping)
Measuring frequency: 62 measurements/second
Built-in mounting holes permit fixed installation for online use
The display shows averaged values calculated during the
update interval t1 e. g. every second 1 x

Graph of the measured values tension meter DTMX

DIP switch
for adjustments
by operator e. g.
display update time

Saving MIN, MAX and PEAK values during a user-selected period. These values can be recalled at the display.
Zero adjustment feature permits use of the tension meter in various measuring positions, maintaining highest accuracy
Calibration to customer supplied material is available (up to two different material calibrations)
Tension meter with built-in material thickness compensator improves accuracy for changing diameters (from tension range - 500 cN)
Hand-held unit with built-in mounting holes permit fixed installation for online use

mounting and material thickness compensator tension meter model DTMX

Easy mounting: For online application

Material thickness compensator: For better accuracy the
material to be measured or a similar material with the same
diameter should be inserted

Standard Features

Everything in operator’s view:
- the guide rollers
- the measured material
- the readings
Filament guide and roller shifting mechanism ensure easy acquisition of the running material
Ball-bearing mounted, V-grooved guide rollers
Tension meter with rugged aluminium housing
Battery operated (AC adapter for continuous operation available)
Certificate of Compliance with the order 2.1 according EN 10204 is included
Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Photo Gallery

Model DTMX is available with different measuring head widths fom 65 mm up to 285 mm

<b>Model DTMB-1000</B> with measuring head<br />width 65 mm

<b>Model DTMX-10K</B> with measuring head<br />width 116 mm

<b>Model DTMX-20K-L</b> with special lever Code L for easy use at high ranges, measuring head width 216 mm

<b>Model DTMX-50K-V1-L</b> with special lever Code L for easy use at high ranges and guide rollers Code V1, measuring head width 285 mm

Available Models

Model	Tension Range cN	Resolution	Measuring Head Width* mm	Applications textil industry e.g yarn count	Applications wire industry e.g. soft-annealed Cu-wire
DTMX-200	0.1 - 200.0	0.1 cN	65	max. 200 tex	max. 0.15 mm Ø
DTMX-500	0.1 - 500.0	0.1 cN	65	20 - 500 tex	0.05 - 0.25 mm Ø
DTMX-1000	50 - 1000	1 cN	65	10 - 1000 tex	0.10 - 0.40 mm Ø
DTMX-2000	200 - 2000	1 cN	65	300 - 2000 tex	0.30 - 0.60 mm Ø
DTMX-2500	250 - 2500	1 cN	116	400 - 2500 tex	0.30 - 0.60 mm Ø
DTMX-5000	500 - 5000	1 cN	116	800 - 5000 tex	0.40 - 1.00 mm Ø
DTMX-10K	1.00 - 10.00daN	0.01 daN	116	1500 - 10000 tex	0.70 - 1.20 mm Ø
DTMX-20K-L	2.00 - 20.00daN	0.01 daN	216 285**	2500 - 20000 tex	1.00 - 2.00 mm Ø
DTMX-50K-L	5.00 - 50.00daN	0.01 daN	216 285**	6000 - 50000 tex	1.80 - 2.20 mm Ø

Other measuring head widths available on request.
Other units of measure are available - g or kg
* Depending on model, either width of filament guide or outer distance between outside
guide rollers.
** deviating measuring head width with Code V1

Calibration

Model	SCHMIDT Calibration Material PA***	SCHMIDT Calibration Material Cu-wire annealed****	Material thickness compensator
DTMX-200	0.12 mm Ø	0.10mm Ø
DTMX-500	0.12 + 0.20 mm Ø	0.16 + 0.25 mm Ø	X
DTMX-1000	0.20 + 0.40 mm Ø	0.25 + 0.40 mm Ø	X
DTMX-2000	0.40 + 0.70 mm Ø	0.40 + 0.60 mm Ø	X
DTMX-2500	0.40 + 0.70 mm Ø	0.40 + 0.60 mm Ø	X
DTMX-5000	0.60 + 1.20 mm Ø	0.60 + 1.00 mm Ø	X
DTMX-10K	0.80 + 1.40 mm Ø	0.70 + 1.20 mm Ø	X
DTMX-20K-L	1.20 + 1.80 mm Ø	steel rope 1.5 und 2.0 mm Ø
DTMX-50K-L	steel rope 1.5 mm Ø (7x7x0.2)	steel rope 2.0 mm Ø (7x7x0.25)

*** Suitable for 95 % of applications (see table )
**** Accuracy: ± 3 % full scale (FS) and ± 1 dgit

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

Guide Rollers

Order-Code

Line Speed

...m/min

Roller Material

Standard	2000	Hardcoated aluminium
Code K	3500	Hardcoated aluminium
Code H	5000	Plasma-coated aluminium
Code T	1000	Plastic (POM) black
Code W	1000	Nickel-plated steel
Code ST	1000	Hardened steel
Code B	1000	Tempered steel
Code CE2	1000	Aluminium ceramic-coated
Code ASY	1000	Hardcoated aluminium, asymmetrical groove Unit without filament guide
Code ASYB	1000	Tempered steel (for tire code), asymmetrical groove Unit without filament guide
Code V1	1000	Hardcoated aluminium (only for DTMX-20K-L and DTMX-50K-L)
Code U	2000	Hardcoated aluminium (radius R3)

Click the order-code, to get picture and drawing of the guide rollers

Spare Rollers

Guide Rollers

Click picture to get an
overview for the guide rollers